BHFMR - 3M BRAND ADHESIVE 1751B PART B
- MSDS: BHFMR
- Manufacturer: 3M
- Product Name: 3M BRAND ADHESIVE 1751B PART B
- National Stock Number: 8040-00-123-6954
Product Identification
Product ID:3M BRAND ADHESIVE 1751B PART B
MSDS Date:07/20/1988
FSC:8040
NIIN:00-123-6954
Kit Part:Y
MSDS Number: BHFMR
Responsible Party
ST. PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 76381
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
N-BUTYL GLYCIDYL ETHER (BGE)
CAS: 2426-08-6
RTECS: TX4200000
Fraction By Weight: 56%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM; 9293
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DIRECT EYE CONTACT MAY BE
IRRITATING TO THE EYES.SKIN: PROLONGED AND REPEATED SKIN
CONTACT MAY PRODUCE A SENSITIZATION REACTION IN CERTAIN
INDIVIDUALS. INHALATION: NO SOLVENT VAPO RS. INGESTION: LOW
TOXICITY VIAINGESTION.
First Aid
First Aid:EYE CONTACT: FLUSH EYES WITH PLENTY OF WATER FOR 10 MINUTES
AND CALL A PHYSICIAN. SKIN CONTACT: WASH WITH SOAP AND
WATER.
Fire Fighting
Flash Point:200F 93C
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:COLLECT SPILLED MATERIAL
Handling
Handling and Storage Precautions:AVOID PROLONG BREATHING OF VAPORS.
AVOID EYE/SKIN CONTACT/BREATHING VOLATILES EVOLVED DUR CURE/DUST FM
GRIND/SAW CURED PROD. LAUNDER CONTAM CLOTHING.
Exposure Controls
Ventilation:LOCAL & MECHANICAL VENTILATION (RECOMMENDED)
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:AS REQUIRED
Work Hygienic Practices:WASH WITH SOAP AND WATER.
Supplemental Safety and Health
NK
Chemical Properties
Spec Gravity:1.30 H2O=1
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY VISCOUS PASTE WITH LITTLE ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, AND SMOKE PARTICLES WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAME.
Disposal
Waste Disposal Methods:LANDFILL OR INCINERATE IN ACCORDANCE WITH LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.